Not signed in (Sign In)
    • CommentTimeMar 14th 2010 edited
    I have been making raised panel drawer-fronts for 8 drawers that are built into a knee-wall. I'm using the same raised panel jig that is described in PTWFE and a ripping blade. It does a terrific job, but the ripping blade leaves saw marks that require quite a bit of sanding before the panels are ready for primer and paint. Today, "light dawned on Marblehead"!
    After cutting all the panels. I removed the blade and installed the conical sanding disc with 150 grit paper. I set the table height so the CSD came to just beneath the panel shoulder. I had cut the bevel at 10 degrees, so I increased the table angle to approx. 14 degrees, and then tweaked it, for a perfect disc and panel bevel match. The panel rested against the jig that was on the rip fence. Using the quill feed, I set the depth of cut to about 1/32", locked the quill feed, and fired the Mark 5 up. I fed the panel along the jig (leaving the jig stationary) and by the CSD. Wow. It was great. With the exception of a small area against the shoulder of the panel each bevel sanded out beautifully in one pass. I took a sanding block when I was done and touched up the small amount required adjacent to the shoulder. I imagine I accomplished what would have been more than an hours worth of hand sanding (8 panels) in less than 5 minutes. Thank you Shopsmith! This job alone made the purchase of the CSD totally worth it. Alec
    • CommentAuthordusty
    • CommentTimeMar 15th 2010
    I appreciate this tip. I have a number of panels to build and this will save some time and will likely improve the results. I hate to sand.
    • CommentAuthorAijca
    • CommentTimeJul 31st 2012
    <p> <a href=>wedding gowns designs</a> fake watches for men, so these watches sold out in a listed Jibei collectors, cluing Ms.Luo Bo have to amplify current models worthwhile of collection in order to live up to watch collectors of hope.But these new models does not average that the elemental Elsie insisted he enrolled a slight Xiao concessions the contrary, from the surface, the arrow to the movement engraving, watchmaking department into a tall gratitude of forever and eagerness duplicate rolex, and the traditional heritage of the Swiss system watch process.Dubey <a href=>vintage wedding dresses</a> . <a href=>bridal wedding dress</a> . . Schaldenbrand watches the maximum full range of functions, simply a combination of 1920 to 1950, the marrow of Art Deco design with the nostalgic sensibilities of history, to Carre ‘Cambre series, <a href=>sexy wedding gowns</a> . and the Diplomatic Calendar watch, <a href=>penina wedding gowns</a> for instance, the chart notion of the source Since the 1920s new wave craft, <a href=>red evening dress</a> . Du Xiao Deng He emulated that annual style</p>
    • CommentAuthorAijca
    • CommentTimeAug 9th 2012
    <p>are highlighted on the waistline will cater to the need of those brides who love a little shining <a href=>wholesale wedding dresses</a> <a href=>orange dresses</a> <a href=>prom dresses 2012</a> . . in addition, the v neckline with hand beaded spaghetti straps, which are very slimming and perfect for larger busted brides <a href=>wedding dresses</a> . . the sexy back with sweep train will also appear an unexpected surprise to you and your audiences.lace is big news in the bridal elegant evening dresses industry this year. a vintage lace wedding dress will always be on the wish list of many brides to be as it can be girly, graceful, and formal. it works for just about any style of wedding traditional church wedding, garden wedding or popularbeach wedding wedding dresses for sale and so on <a href=>cheap flower girl dresses</a> . . this strapless lace bridal gown style bc622 supplied at has a fit flattering bodice. <a href=>prom dresses</a> . the matching sash draped at side makes the whole dress more elegant and </p>