Not signed in (Sign In)
    •  
      CommentAuthorNick
    • CommentTimeSep 3rd 2009 edited
     
    The fixture shown is an adjustable miter gauge extension with a stop to position the wood before each cut. One face is fixed; the other slides left and right so you can adjust the position of the stop relative to the cutter. When mounted on a miter gauge, it will work with either a table saw and a dado cutter or a table-mounter router and a straight bit.

    Make the stop the same size as the fingers you want to cut. If you want to cut different sizes of fingers, make several sliding faces, each with a stop of the appropriate size.

    When setting up the fixture, use the adjustment screw to fine tune the position of the stop. One turn of the stop will move the sliding face and its stop 1/32". See the attached PDF for complete instructions on how to make finger joints.

    With all good wishes,
    Nick
    • CommentAuthor8iowa
    • CommentTimeDec 19th 2009
     
    Last year I went thru "finger joint hell" while making a curved top treasure chest for my grandsonm. I made the finger joint jig from plans shown in one of Nick's books, but It did not have the adjustment block.

    Folks, let me tell you that an error in spacing of just a few thousands multiplies itself in an 8 inch run to the point that a fit is impossible. First I discovered that the spacer stud needs to be exactly the same width as the dado blade, and I mean precise. Next, without the adjustment block, micro-incremental changes in the spacing are almost impossible. Frustratingly, I had to give up on 1/4" fingers and went to 3?8".

    Nick, how about showing greater detail of the adjustment block.
    • CommentAuthordusty
    • CommentTimeDec 20th 2009
     
    There has been a lot of discussion about needing to make measurements to within .001" when doing wood working tasks. This is one where such measurements are almost a necessity. All measurements associated with the pin and pin location must be as accurate as you can possible make them. The level to which you comply will determine the degree of usefulness that you build into this jig.

    Having said all of that, I should probably go back and rebuild this jig. Maybe I can make one that works well this time.
    • CommentAuthorAijca
    • CommentTimeAug 1st 2012
     
    <p>began collecting the timepieces in 1984, focusing on the aesthetic beauty in the cases and the dials, <a href=http://www.felldress.org/>couture wedding gowns</a> and unique metal combinations. The resulting assortment consists of 114 watches, including some rare Stelline, Ref 6062s several Daytonas important chronographs and an assortment of personalized watches. The assortment also includes superb examples in the Submariner, the GMT, the Rolex Explorer <a href=http://www.felldress.org/>evening dresses</a> . <a href=http://www.felldress.org/>floor length wedding dress</a> , and the Sea Dweller.Collector Davide Blei has accumulated the finest Rolex assortment within the world. Highlighted in the sale is Blei pink gold ? <a href=http://www.felldress.org/>vintage wedding dresses</a> . °Stelline Oyster Perpetual Chronometer with star indexes estimated at $260 <a href=http://www.felldress.org/>bridal wedding dress</a> . ,000-$320,000. Following the ?°Stelline is really a ?°Paul Newman Cosmograph Daytona, complete with white dial, black accent sub-dials <a href=http://www.felldress.org/>sexy wedding gowns</a> . , and applied gold indexes on a stainless metal canvas the time</p>
    • CommentAuthorAijca
    • CommentTimeAug 9th 2012
     
    <p>Raymond Weil watch using the following components from the progressive style: a godron decor from the bezel <a href=http://www.yeardress.org/>celebrity evening dresses</a> . ,curved outlines,also as a sophisticated bracelet. These extremely components turned the timepiece into a accurate horological standout. The new Parsifal watch accommodates a mechanical selfwinding movement,which utilizes an ETA 2892/2 base with Dubois Depraz 2010 chronograph module. <a href=http://www.yeardress.org/>wedding dresses</a> . It <a href=http://www.yeardress.org/Bridesmaid-Dresses.html>green bridesmaid dresses</a> . ,s adorned with 57 rubies. The mechanism offers a 42hour power reserve. The movement is incorporated into a roundshaped case,sculptured in an 18ct pink gold and steel. <a href=http://www.yeardress.org/>flower girl dresses</a> It functions the dimensions of 41.four mm x 11.85 mm, <a href=http://www.yeardress.org/>princess wedding dresses</a> diameter and thickness indicated respectively. The case is outfitted having a fluted,screweddown crown,which reveals RW monogram in transparent resin. <a href=http://www.yeardress.org/>prom dresses 2012</a> . It,s also equipped with an 18ct </p>
    • CommentAuthorBrucewave
    • CommentTimeJan 17th 2013
     
    OK, you could that again.






    ___________________________________________________
    http://www.kaufendiablo3gold.de/